CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

Multi Phase_ Multi Pressure Cell Zone_

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 27, 2020, 20:34
Default Multi Phase_ Multi Pressure Cell Zone_
  #1
New Member
 
Mohammad Jamali
Join Date: Oct 2020
Posts: 6
Rep Power: 2
Mohammad_Jamali is on a distinguished road
Hi Dear Engineers .
i have a Model For Trace Methane Leak In Gas station -
at the Present I have Some Question :

1: after selecting Multiphase Model and Define Cell Zone As Pic - i need To Define cell Different Properties after Initialize , in Patch Window I want Define coefficients such Volume Fraction and Cell Pressure but There aren't Some Variables Such Pressure which I need , I try to Define Field Function But It does not work Properly and Effect on Volume Friction Variable , Now How I Could To define These Coefficients?

2:Can I define Material Properties by Use Of Piece Wise Liner or Polynomial Function that Set By Pressure ( Not Temperature ) or need to UDF ?



Thanks so much for the helps from friends
Attached Images
File Type: jpg Untitled.jpg (34.4 KB, 0 views)
File Type: jpg 01.jpg (45.8 KB, 0 views)
File Type: jpg 02.jpg (31.7 KB, 0 views)
File Type: jpg 03.jpg (67.2 KB, 0 views)
Mohammad_Jamali is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] periodic faces not matching Aadhavan ANSYS Meshing & Geometry 6 August 31, 2013 12:25
Unsteady pressure differential between inlet and outlet of the pipe for single phase joshi20h FLUENT 0 September 26, 2012 13:41
Change cell zone index/thread during simulation neilduffy1024 FLUENT 0 January 17, 2011 10:40
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 02:08
Hydrostatic pressure in 2-phase flow modeling (long) DS & HB Main CFD Forum 0 January 8, 2000 16:00


All times are GMT -4. The time now is 19:42.