CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

water-air interface is not in dynamic equilibrium

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 14, 2021, 01:40
Default water-air interface is not in dynamic equilibrium
  #1
New Member
 
Stanlee
Join Date: Aug 2017
Location: New Zealand
Posts: 19
Rep Power: 8
stanlee8 is on a distinguished road
Hi experts

I am simulating a falling liquid film evaporation, see the pic.

Laminar, Mixture, Condensation-evaporation Lee model with a UDF defining the saturation temperature (based on the vapour partial pressure) was used. The mass transfer is indeed on the interface, which means my UDF work? It is a steady-state simulation. The settings are shown below. The water vapour- air mixture is incompressible.

I expect the RH will be equal to 100% around the water-air interface, but in fact, the simulation results show that the RH near the interface is far lower than 100%.

Does anyone have any idea about the reason?

Regards

stanlee8 is offline   Reply With Quote

Reply

Tags
evaporation condensation, lee model, mixture

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Table bounds warnings at: END OF TIME STEP CFXer CFX 4 July 17, 2020 00:44
Basic Nozzle-Expander Design karmavatar CFX 20 March 20, 2016 09:44
Heat Transfer Coeff on the water air interface Anton Main CFD Forum 3 June 2, 2010 02:49
Help!!!problems in air jet into water bath kim FLUENT 4 June 9, 2003 08:04
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09


All times are GMT -4. The time now is 09:29.