CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

mass transfer udf

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 14, 2021, 09:18
Default mass transfer udf
  #1
New Member
 
dsfdsgvd
Join Date: Jul 2021
Posts: 2
Rep Power: 0
kevinllll is on a distinguished road
hello,l stimulation a droplet evaporating with DEFINE_MASS_TRANSFER udf.
It can work but the temperature of vapor is strange.l define the temperature of droplet is 290K and the environment is 297K,but the temperature of vapor will exceed 297K.l don't know whether I need to add additional energy sources and momentum sources with DEFINE_SOURCE udf.Does DEFINE_MASS_TRANSFER udf will add energy sources and momentum sources automatically?Please help me.
kevinllll is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF for heat and mass transfer, transient simulation Akash Siddique Fluent UDF and Scheme Programming 7 December 7, 2018 07:32
UDF for heat and mass transfer Akash Siddique Fluent UDF and Scheme Programming 6 September 1, 2018 04:51
Mass transfer UDF Stevie_1200 Fluent UDF and Scheme Programming 12 March 8, 2017 09:09
using define mass transfer udf for cavitation Komon Fluent UDF and Scheme Programming 14 June 21, 2016 03:50
Question about heat transfer coefficient setting for CFX Anna Tian CFX 1 June 16, 2013 07:28


All times are GMT -4. The time now is 19:51.