Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

Reversed flow in faces on pressure outlets

Updated Threads

Reply

Search this Thread

October 22, 2021, 04:22	Reversed flow in faces on pressure outlets	#1
SBCR01 New Member Join Date: Sep 2021 Location: India Posts: 3 Rep Power: 4	I am simulating a 1-meter height 0.15-meter diameter of a cylindrical bubble column reactor. where the liquid is the primary phase and the air is the secondary phase. After initialization air is patched from 0.3 to 1 meter of column remaining water is filled initially from 0 to 0.3 meters of the column. While running the simulation, a message is shown that reversed flow in faces on pressure outlet in each iteration. Why is showing? please explain it?

Reply

Tags

air-water, bubble columns, multiphase flow

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] snappyHexMesh stuck when snap is turned on	yukuns	OpenFOAM Meshing & Mesh Conversion	3	February 2, 2021 13:05
[snappyHexMesh] Help with Snappy: no layers growing	GianF	OpenFOAM Meshing & Mesh Conversion	2	September 23, 2020 08:26
reversed flow in xxxx faces on pressure outlet	franzdrs	FLUENT	8	January 4, 2020 20:12
[snappyHexMesh] SHM Layer Addition Phase	dickcruz	OpenFOAM Meshing & Mesh Conversion	4	November 1, 2018 07:05
Hydrostatic pressure in 2-phase flow modeling (CFX4.2)	HB &DS	CFX	0	January 9, 2000 13:19

All times are GMT -4. The time now is 03:56.