|
[Sponsors] |
Error in liquid fraction during solidification of droplet |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 3, 2022, 07:07 |
Error in liquid fraction during solidification of droplet
|
#1 |
New Member
Uttar Pradesh
Join Date: Jun 2022
Posts: 2
Rep Power: 0 |
Document attached below
animation-2_0016.jpeg animation-2_0017.jpeg animation-2_0018.jpeg I am trying the simulation for droplet solidification over substrates. The setup condition is given below. droplet ejecting from the nozzle at 1000K and substrate gave to 300K. region 1 patched to molten metal volume fraction 1 and region 2 patched to air volume fraction 0. Problem: When the droplet reaches the substrate it starts solidifying and becoming blue in liquid fraction because the temperature comes to 300K. then somehow it merges with the air domain because that is also blue. I want to ask that is there any way that the air domain can be made colorless or transparent so the proper droplet shape can be seen. Please Reply. Thanks in Advance. |
|
Tags |
ansys, droplet simulation, fluet |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
multiphaseEulerFoam (OF2.3.0) : Courant number explodes when running in parallel | Mehrez | OpenFOAM Running, Solving & CFD | 10 | May 18, 2016 12:44 |
multiphase turbulance case floating error | harsha_kulkarni | OpenFOAM Running, Solving & CFD | 3 | February 18, 2016 06:06 |
liquid fraction | abo_anas | FLUENT | 0 | February 19, 2012 06:00 |
Liquid Droplet Impingement | naimishharpal | STAR-CCM+ | 0 | February 28, 2010 14:24 |
CFX Solver Memory Error | mike | CFX | 1 | March 19, 2008 08:22 |