Error at Node while running Calculation

Rajkool · April 30, 2020, 12:24

Hello all,

I got some unknown errors while calculating. I have attached the picture, you can find it in Console in the pic. Please let me know if you could help me?

Thank you in advance
Raj

vinerm · April 30, 2020, 14:37

The machine you are using does not seem to have enough RAM. Do not run in parallel because parallel simulation requires more RAM. Run in serial.

Rajkool · May 3, 2020, 18:05

It is the same model. I have run the simulation on the model before, now I am trying to play with the solution controls to get my solution.

I am operating it on the clusters (around 128GB RAM), but I don't know why I am facing this error.

vinerm · May 4, 2020, 16:19

If it is a cluster then most likely you are not the only user; there might be other users using the machine at that time. The error you got is regarding less RAM. If you try it again and if there is enough RAM available, the case will run.

April 30, 2020, 14:37	Ram	#2
vinerm Senior Member Vinerm Join Date: Jun 2009 Location: Nederland Posts: 2,946 Blog Entries: 1 Rep Power: 35	The machine you are using does not seem to have enough RAM. Do not run in parallel because parallel simulation requires more RAM. Run in serial. Rajkool likes this. __________________ Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority.

May 4, 2020, 16:19	Memory Issue	#4
vinerm Senior Member Vinerm Join Date: Jun 2009 Location: Nederland Posts: 2,946 Blog Entries: 1 Rep Power: 35	If it is a cluster then most likely you are not the only user; there might be other users using the machine at that time. The error you got is regarding less RAM. If you try it again and if there is enough RAM available, the case will run. __________________ Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Error in mesh writing	helios	ANSYS Meshing & Geometry	21	August 19, 2021 14:18
ANSYS Licensing Problem, Processes Running but Showing as Not Running	penguinman	ANSYS	3	September 27, 2016 13:30
Coal combustion, big node, slow calculation, parallel	Whitebear	CFX	1	April 8, 2014 03:27
Running MPI code on a multiprocessor node	wen	Main CFD Forum	7	April 19, 2006 16:35
Warning 097-	AB	Siemens	6	November 15, 2004 04:41

May 3, 2020, 18:05		#3
Rajkool Member Raj Join Date: Jan 2020 Posts: 92 Rep Power: 6	It is the same model. I have run the simulation on the model before, now I am trying to play with the solution controls to get my solution. I am operating it on the clusters (around 128GB RAM), but I don't know why I am facing this error.