CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

Diameter of secondary phase in Eulerian eulerian model

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 1, 2020, 08:32
Default Diameter of secondary phase in Eulerian eulerian model
  #1
New Member
 
anuj
Join Date: Feb 2020
Posts: 17
Rep Power: 6
user9 is on a distinguished road
I am simulating 2-D axisymmetric miniature channel. I WANT TO STUDY AIR - WATER SLUG FLOW WITHOUT PHASE CHANGE.

IDEALLY FOR SLUG FLOW WE SHOULD USE VOF MODEL.

But I want to use EULERIAN - EULERIAN model where it asks for DIAMETER OF SECONDARY PHASE which is air in my case.

By default it takes 10^(-5) m .
What should be diameter of secondary phase?IMG_20200501_180151.jpg
user9 is offline   Reply With Quote

Old   May 1, 2020, 15:09
Default Length Scale
  #2
Senior Member
 
vinerm's Avatar
 
Vinerm
Join Date: Jun 2009
Location: Nederland
Posts: 2,946
Blog Entries: 1
Rep Power: 35
vinerm will become famous soon enough
If the flow morphology is slug or segregated, you won't get good results with Euler until and unless the mesh is very fine. As far as length scale is concerned, you can use a size comparable to expected slug. A smaller size will cause over-interaction between phases and diffuse more momentum than otherwise expected.
__________________
Regards,
Vinerm

PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority.
vinerm is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Two-phase flow _Problem with phase diameter divergence esma Fluent Multiphase 1 January 8, 2020 14:51
Mass balance for eulerian model with thermal phase change hamed.majeed Fluent Multiphase 1 February 13, 2019 08:11
Secondary phase in Eulerian model hamed.majeed FLUENT 0 October 10, 2018 11:59
Diameter variation eulerian model alekso FLUENT 0 April 5, 2012 12:25
Two phase Eulerian Model Problem senthil FLUENT 5 May 21, 2003 02:55


All times are GMT -4. The time now is 11:37.