Transient UDF

omerksx · May 30, 2013, 03:55

Hi there. i wanna ask a question about making of a time-dependent user defined function.

i have a 2d case which has 2 cell zones. Solving it laminar since inlet speed is slow enough.

i want to set an udf regarding cell-zone temperature fixed value. i want that valueto be fixed at 500K for 0.5 seconds, and then cease it's fixed temp. effect.

how can i do it? i've already tried DEFINE_ADJUST to set temperature of its cells manually (by cellzone ID and interior part ID) ,it won't work, and tried to use DEFINE_PROFILE too.

blackmask · May 30, 2013, 05:22

You do not have to use UDF. Use the fixed value option of zones from the GUI.

omerksx · May 30, 2013, 07:24

i need to use udf because i need a time dependent fixed value. i need udf to set fixed value to 500k then set it automatically to "none".

is there any way of doin this ???

May 30, 2013, 03:55	Transient UDF	#1
omerksx New Member Join Date: May 2013 Posts: 2 Rep Power: 0	Hi there. i wanna ask a question about making of a time-dependent user defined function. i have a 2d case which has 2 cell zones. Solving it laminar since inlet speed is slow enough. i want to set an udf regarding cell-zone temperature fixed value. i want that valueto be fixed at 500K for 0.5 seconds, and then cease it's fixed temp. effect. how can i do it? i've already tried DEFINE_ADJUST to set temperature of its cells manually (by cellzone ID and interior part ID) ,it won't work, and tried to use DEFINE_PROFILE too.

May 30, 2013, 07:24	not really,	#3
omerksx New Member Join Date: May 2013 Posts: 2 Rep Power: 0	i need to use udf because i need a time dependent fixed value. i need udf to set fixed value to 500k then set it automatically to "none". is there any way of doin this ???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to specify a transient profile with spacial variant without UDF?	joy2000	Fluent UDF and Scheme Programming	0	February 6, 2013 08:51
UDF steady state to transient	Vcent	Fluent UDF and Scheme Programming	0	December 20, 2012 11:55
Best practice for transient simulations?	siw	CFX	5	October 30, 2010 05:45
Udf for a transient analisys of a VAWT	ermes	Fluent UDF and Scheme Programming	14	July 14, 2010 16:12
spatial and transient B.C. using UDF	Park	FLUENT	0	April 28, 2005 21:32

May 30, 2013, 05:22		#2
blackmask Senior Member Join Date: Aug 2011 Posts: 421 Blog Entries: 1 Rep Power: 21	You do not have to use UDF. Use the fixed value option of zones from the GUI.