CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent UDF and Scheme Programming

UDF for periodic boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 23, 2016, 13:45
Default UDF for periodic boundary condition
  #1
New Member
 
Srivatsan
Join Date: May 2016
Posts: 4
Rep Power: 9
Srivatsan Madhavan is on a distinguished road
Hello

I want to write a UDF for periodic boundary condition in Fluent. I have to take temperature and velocity data points from outlet and feed it back to inlet. I was going through the fluent manual and found that there are two functions, DEFINE_PROFILE and DEFINE_EXECUTE_AT_END. I am not sure if I can write a function within a function as required by this case. If anyone else has encountered the same issue, could you please throw some light.
Srivatsan Madhavan is offline   Reply With Quote

Old   May 23, 2016, 18:45
Default
  #2
`e`
Senior Member
 
Join Date: Mar 2015
Posts: 892
Rep Power: 18
`e` is on a distinguished road
Have you tried using the periodic boundary condition, or do you need to use a UDF? Instructions: http://www.cfd-online.com/Forums/flu...-tutorial.html
`e` is offline   Reply With Quote

Old   May 23, 2016, 19:23
Default
  #3
New Member
 
Srivatsan
Join Date: May 2016
Posts: 4
Rep Power: 9
Srivatsan Madhavan is on a distinguished road
Thanks for the reply ...I am aware of the periodic bc ...but want to do it as a udf due to some constraints in my model ...
Srivatsan Madhavan is offline   Reply With Quote

Old   June 20, 2016, 11:04
Default
  #4
New Member
 
Join Date: May 2012
Posts: 2
Rep Power: 0
spoink is on a distinguished road
Hi Srivatsan,

have you achieved any success? If yes, I would highly appreciate if you could explain your final workflow.

Thanks in advance!


spoink is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
write a UDF to give a velocity boundary condition at an interior face Tharanga Fluent UDF and Scheme Programming 19 August 5, 2018 05:29
several fields modified by single boundary condition schröder OpenFOAM Programming & Development 3 April 21, 2015 06:09
An error has occurred in cfx5solve: volo87 CFX 5 June 14, 2013 18:44
Boundary Condition Types Using Scheme and UDF Nasir FLUENT 0 September 15, 2008 22:54
UDF : boundary condition ID Flav FLUENT 4 June 28, 2001 10:52


All times are GMT -4. The time now is 14:49.