CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Fluent UDF and Scheme Programming

Dynamic Mesh VOF Inerface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 10, 2017, 10:17
Default Dynamic Mesh VOF Inerface
  #1
New Member
 
MEKSEM HOCINE
Join Date: Mar 2017
Posts: 5
Rep Power: 2
MEKSEM is on a distinguished road
Hello everybody,

I do a simulation to see the thermodynamic behavior of air in a liquid piston cylinder using the VOF model.
Now, to improve the model, I want to use dynamic meshing on the air / liquid interface.
Knowing that I impose an initial speed profile for the interface
Is there anyone who can orient me to build UDF

Thanks a lot for your answers,
MEKSEM is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic Mesh kennyboy FLUENT 0 February 4, 2016 12:05
Dynamic mesh setup, VOF 2 Phase, moving zones, possible? (diagram / picture) silent2608 Fluent Multiphase 1 January 21, 2016 07:58
Update of the variables after dynamic mesh motion. gtg258f OpenFOAM Programming & Development 9 January 18, 2014 11:08
potentialFreeSurfaceFoam with Dynamic Mesh GuilhermeMP OpenFOAM Programming & Development 1 October 6, 2013 03:05
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11


All times are GMT -4. The time now is 07:15.