CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent UDF and Scheme Programming

How to impose the condition |∇∅|=1 on the wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 20, 2021, 08:35
Default How to impose the condition |∇∅|=1 on the wall
  #1
New Member
 
patpat
Join Date: Sep 2021
Posts: 1
Rep Power: 0
patpat is on a distinguished road
I am modeling the deformation of a water droplet placed on a horizontal flat surface in a two-phase system (VOF model). The flow of the oil phase causes droplet deformation. The oil flow is parallel to the solid surface (wall). I want to read/extract from the Fluent value of dynamic contact angle of stationary but deformed droplet shape (in every iteration step for transient simulation).

I will use the relationship given in the attachment where ∇∅ denotes the gradient of volume fraction. The problem I have met is how to impose the condition |∇∅|=1 on the wall. This boundary condition is necessary to correctly calculate the gradient near the wall (cells adjacent to the wall).
I would be grateful for any help.
Attached Images
File Type: jpg cos(teta).JPG (16.2 KB, 8 views)
patpat is offline   Reply With Quote

Reply

Tags
contact angle reading, vof, volume fraction gradient, wall boundary conditions

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Divergence in AMG solver! marina FLUENT 20 August 1, 2020 12:30
Issue with Isothermal Wall Boundary Condition aero_peace SU2 3 October 25, 2019 09:01
wall adiabatic thermal condition Weiqiang Liu FLUENT 14 February 14, 2019 12:03
Diameter varying slip condition on wall , 2d pipe flow k.giannoko OpenFOAM Pre-Processing 0 August 25, 2016 15:54
CFX fails to calculate a diffuser pipe flow shenying0710 CFX 7 March 26, 2013 05:13


All times are GMT -4. The time now is 06:50.