|
[Sponsors] |
April 19, 2022, 19:29 |
UDF for ABL turbulent intensity
|
#1 |
New Member
menoufia
Join Date: Mar 2021
Posts: 6
Rep Power: 5 |
Atmospheric boundary layer (ABL)validation case:
I wrote the UDF for all the profiles, and I am stuck at the turbulent intensity I don't know how to interpolate the following wind tunnel information given by the author any advice? the author used turbulent kinetic energy based on the mean velocity profile and the measured turbulence intensity as follows: - The turbulent kinetic energy formula used is k=a*(Uref*I)^2 where a is a constant from 0.5 to 1.5, I turbulent intensity (figure 1) - the wind tunnel has a reference turbulent intensity of 10% at building height, a turbulent intensity of 17% near the ground (12mm), and 5% at gradient height (728mm). |
|
Tags |
atmospheric bl, turbulent intensity, turbulent kinetic energy, udf |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to calculate Turbulent Intensity? | prem | FLUENT | 10 | September 29, 2018 10:46 |
value of turbulent intensity at inlet | eng.abdul | Fidelity CFD | 11 | February 1, 2018 04:09 |
Turbulent Length Scale and Intensity for Airfoil | shamim | STAR-CCM+ | 2 | July 13, 2017 00:11 |
Question regarding Reynolds Number and Turbulent Intensity | maxj | Main CFD Forum | 4 | March 5, 2013 07:16 |
Turbulent Viscosity UDF | Raphael | FLUENT | 2 | January 23, 2006 05:04 |