CFD Online Discussion Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Fluent UDF and Scheme Programming (https://www.cfd-online.com/Forums/fluent-udf/)
-   -   UDF for coal gasification (https://www.cfd-online.com/Forums/fluent-udf/46625-udf-coal-gasification.html)

alihosseini63 July 8, 2013 17:44
Quote:
Originally Posted by RE13
;146869
Hello,

I have UDF + scheme file for coal devolatilization, combustion, and gasification. I use the discrete phase model in Fluent. Within the define injections panel you will see to the right an option to hook custom laws to your particles. This is where you connect your gasification law to the Fluent solver. Someone else wrote the UDF (it is over 1500 lines) so I am not too comfortable with the physical models/kinetic rate parameters employed, but I am learning fast. I would like to correspond with you on this because we share the same problem.

Regards, AAS
Hello

I am Ali, PhD student in university of Alberta and I'm working on coal gasificastion. Now I've faced problem writing udf specially for multiple reaction. Can you please send me UDF sample for coal gasification.

Regards
Ali

Leepox August 15, 2013 08:06
Hi to all,

I am also quite interested in obtaining this UDF sample since it would help me greatly in defining functions and making the DPM switches work within Fluent.

Cheers!

anawana January 3, 2014 21:52
I have the UDF code downloaded from this forum
 
Hello, I a master student from China I also have the UDF which is more than 1500 lines, but I believe that the code is used for parallel calculating.

anawana January 3, 2014 21:56
I also work on coal gasification and get stucked in the UDF,could you please send me your Matlab code?

Leepox January 3, 2014 22:11
Quote:
Originally Posted by anawana (Post 468546)
Hello, I a master student from China I also have the UDF which is more than 1500 lines, but I believe that the code is used for parallel calculating.
hi, is it possible if you can share your code with me? email chip_spark@yahoo.com

ian.maes January 7, 2014 05:10
Quote:
Originally Posted by anawana (Post 468546)
Hello, I a master student from China I also have the UDF which is more than 1500 lines, but I believe that the code is used for parallel calculating.
Hej Anawana,
If you want I would like to share experiences on the specifics of using UDFs for gasification.
You can send me a mail at ian.maes087@gmail.com if you're interested.

Kind regards,

Ian

onlylno February 13, 2014 07:32
Quote:
Originally Posted by anawana (Post 468548)
I also work on coal gasification and get stucked in the UDF,could you please send me your Matlab code?
I am from China too. I am now in state key lab of coal combustion. Can you share some experience in gasificaion?

Diego88 February 17, 2014 10:45
UDF code
 
Hi Hemant,

I am working on biomass combustion in fluidized bed reactor.
I would be really grateful if you could also send me this UDF.
My e-mail is: diegoperrone_88@libero.it

Thank you very much in advance

anawana March 8, 2014 08:52
help
 
Quote:
Originally Posted by RE13
;146869
Hello,

I have UDF + scheme file for coal devolatilization, combustion, and gasification. I use the discrete phase model in Fluent. Within the define injections panel you will see to the right an option to hook custom laws to your particles. This is where you connect your gasification law to the Fluent solver. Someone else wrote the UDF (it is over 1500 lines) so I am not too comfortable with the physical models/kinetic rate parameters employed, but I am learning fast. I would like to correspond with you on this because we share the same problem.

Regards, AAS
I am a master student and I am stuck in the UDF about the gasification.I also use the DPM model to simulate the process.Would you please send the code the me ?My adress is 18266317494@163.com

Hou June 3, 2014 06:02
Udf help needed!
 
Hello, i m currently doing simulation on biomass gasification too. I just found out that Ansys Fluent does not have the feature to include all the reaction and UDF is needed. Any kind soul is able to provide me with some example of UDF for the biomass reaction will be greatly appreciated. Thanks very much in advance. My e-mail will be taengoohou@gmail.com

Messi June 27, 2014 11:36
Quote:
Originally Posted by RE13
;146869
Hello,

I have UDF + scheme file for coal devolatilization, combustion, and gasification. I use the discrete phase model in Fluent. Within the define injections panel you will see to the right an option to hook custom laws to your particles. This is where you connect your gasification law to the Fluent solver. Someone else wrote the UDF (it is over 1500 lines) so I am not too comfortable with the physical models/kinetic rate parameters employed, but I am learning fast. I would like to correspond with you on this because we share the same problem.

Regards, AAS
Hi, I am also studying with the UDF for coal combustion. Could you send me a copy of the UDF?
Thanks very much. My email is yangxin0412@gmail.com

Messi June 27, 2014 11:43
Quote:
Originally Posted by Diego88 (Post 475348)
Hi Hemant,

I am working on biomass combustion in fluidized bed reactor.
I would be really grateful if you could also send me this UDF.
My e-mail is: diegoperrone_88@libero.it

Thank you very much in advance
Hi, have you got the udf?
my research is about oxy-coal combustion. i also need to wirte a udf for the char combustion. If possible, could you send me a copy? a very original one is also OK.

Many thanks. My email is yangxin0412@gmail.com

liuxub@hotmail June 30, 2014 01:44
Quote:
Originally Posted by RE13
;146869
Hello,

I have UDF + scheme file for coal devolatilization, combustion, and gasification. I use the discrete phase model in Fluent. Within the define injections panel you will see to the right an option to hook custom laws to your particles. This is where you connect your gasification law to the Fluent solver. Someone else wrote the UDF (it is over 1500 lines) so I am not too comfortable with the physical models/kinetic rate parameters employed, but I am learning fast. I would like to correspond with you on this because we share the same problem.

Regards, AAS
Hello,
I am working with a CFD simulation of coal gasification. Could you send me the UDF to complete my simulation? my e-mail:jdliuxin@163.com
Many thanks,

sadeghdj September 25, 2014 23:08
Need UDF
 
Can you please send me the UDF, I appreciate in advance!

Quote:
Originally Posted by RE13
;146869
Hello,

I have UDF + scheme file for coal devolatilization, combustion, and gasification. I use the discrete phase model in Fluent. Within the define injections panel you will see to the right an option to hook custom laws to your particles. This is where you connect your gasification law to the Fluent solver. Someone else wrote the UDF (it is over 1500 lines) so I am not too comfortable with the physical models/kinetic rate parameters employed, but I am learning fast. I would like to correspond with you on this because we share the same problem.

Regards, AAS

steve-H March 3, 2015 03:30
Re: UDF for coal gasification
 
Hi Hemant and AAs,

Many thanks if you could share the UDF codes for gasification. I am stuck to this during compiling. Much appreciated if you could share to smkstevehong@gmail.com.

Thanks

pratikppande March 27, 2015 10:35
I would be really grateful if you could also send me this UDF. I am working on this since last 6 months. my e-mail is pratikppande@gmail.com

Thank you very much in advance :-)

pratikppande March 27, 2015 10:39
if u have got code for gasification please do share with me i will be obilised to take it from you.. I would be really grateful if you could also send me this UDF. my email ID is pratikppande@gmail.com

Thank you very much in advance :-)

udayb December 23, 2015 07:31
request for udf of coal/biomass gasification
 
hello,
I am working on the coal gasification. can anyone share udf or algorthim so that i can use it as reference file to write my own udf.
email id - bhogadch@iitr.ac.in
Thank you in advance

mohammadjm2008 April 9, 2016 10:43
Quote:
Originally Posted by RE13
;146869
Hello,

I have UDF + scheme file for coal devolatilization, combustion, and gasification. I use the discrete phase model in Fluent. Within the define injections panel you will see to the right an option to hook custom laws to your particles. This is where you connect your gasification law to the Fluent solver. Someone else wrote the UDF (it is over 1500 lines) so I am not too comfortable with the physical models/kinetic rate parameters employed, but I am learning fast. I would like to correspond with you on this because we share the same problem.

Regards, AAS
Hello,
I am working with a CFD simulation of an entrained flow gasifier. Would you mind please send me the UDF.

Thanks in advanced

Best Regards

189381dev March 3, 2017 00:44
udf for fast pyrolysis in bubbling fluidized bed
 
Dear sir ,
I am working my project "modeling and simulation of bubbling fluidized bed for fast pyrolysis " .I am new and don't know how to simulate kindly suggest me and provide udf if necessary.my email is 189381devraj41514@gmail.com.
Thank u


All times are GMT -4. The time now is 11:50.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page