CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent UDF and Scheme Programming

Flux in a Define_Profile

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 16, 2009, 21:30
Default Flux in a Define_Profile
  #1
New Member
 
Join Date: Oct 2009
Posts: 2
Rep Power: 0
kash is on a distinguished road
I assign the same flux in a define profile udf but get opposite directions. I.e flux-in on one wall and the flux-out on another wall. I have to mention the flux is formulated from a vector dot n (the unit normal area) Please advice
kash is offline   Reply With Quote

Old   November 27, 2011, 12:08
Default udf
  #2
New Member
 
arash
Join Date: Jun 2011
Posts: 7
Rep Power: 14
arashoil is on a distinguished road
Quote:
Originally Posted by kash View Post
I assign the same flux in a define profile udf but get opposite directions. I.e flux-in on one wall and the flux-out on another wall. I have to mention the flux is formulated from a vector dot n (the unit normal area) Please advice
hi,

can i modelling asphaltene precipitation that exist in crude oil by uusing ceramic filter monolit by defult formolation in fluent?

i want to modelling separation of asphaltene from crude oil by 19-channel ceramic filter,but i think it is not define in FLUENT that precipitate asphaltene on surface of ceramic channel base on diffrences between pore size.

i must write UDF for this porpuse or not?

most of oil flow must pass through the membrane wall and most of asphaltene must form a gel-layer and precipitation on inner surface od channel.

please help me as soon as possible

thank you so much
arashoil is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
Heterogeneous heat flux Kev STAR-CD 4 July 7, 2009 05:48
UDS flux and boundaries Kasper Skriver FLUENT 0 April 18, 2006 09:36
Definition of Mass flux F1 Gavin Siemens 1 April 17, 2006 18:51
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09


All times are GMT -4. The time now is 09:54.