CFD Online Logo CFD Online URL
Home > Forums > Fluent UDF and Scheme Programming

parallel running issue

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 18, 2012, 18:42
Wink parallel running issue
New Member
Join Date: Nov 2011
Posts: 6
Rep Power: 8
xiaokang is on a distinguished road
Dear all,
I compiled a parallel udf and work very well in local PC.
When I ran it in cluster with parallel mode, it claimed a lot of warns at the first time. Then i built and load udf again in cluster(the warns still claimed).And then i read the same case for the second try, nothing claim~~everything seems ok!

So, is that ok? I heard if you run your case in parallel, you must make your "build path" as a "absolute path", or you must put your udf into every node your case use....... All of that I didn't do, but just build udf again and read case again, seems everything goes well! I really worry about there do have some error but just no claim to me.

ps, I use fluent13 version.

Great thanks!

xiaokang is offline   Reply With Quote


udf parallel

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
OF 2.0.1 parallel running problems moser_r OpenFOAM Running, Solving & CFD 7 March 18, 2014 09:49
RSH problem for parallel running in CFX Nicola CFX 5 June 18, 2012 18:31
parallel running - error while loading shared libraries: seami OpenFOAM Installation 1 December 9, 2011 05:39
Running PimpleDyMFoam in parallel paul b OpenFOAM Running, Solving & CFD 8 April 20, 2011 05:21
Running dieselFoam in parallel. Palminchi OpenFOAM 0 February 17, 2010 05:00

All times are GMT -4. The time now is 15:59.