7.3 kg/hr air + 0.43 kg/hr CH4 at INLET (How to specify at boundary inlet?)

Matlab69 · April 22, 2012, 20:45

Hi guys,

I am modelling a flow of air and CH4.

The gases are supplied to the inlet as follows: 7.3 kg/hr air + 0.43 kg/hr CH4

How can I define this at inlet boundary condition..?

I only seem to have a choice of specifying one of the gases and it's mass flow. I can't do both.

chg · April 22, 2012, 22:16

I think mixture model can do this.

Matlab69 · April 22, 2012, 22:45

Quote:

Originally Posted by chg

I think mixture model can do this.

Thanks, but which one exactly do you think..?

Matlab69 · April 23, 2012, 08:23

bump......

Micael · April 23, 2012, 13:13

Model -> Species Transport

You have to define a mixture material. Then you will have a access to "species" tab in your inlet boundary menu.

Look into theory and user guide, there is good stuff about that.

April 22, 2012, 20:45	7.3 kg/hr air + 0.43 kg/hr CH4 at INLET (How to specify at boundary inlet?)	#1
Matlab69 New Member Andrius Join Date: Mar 2012 Posts: 23 Rep Power: 14	Hi guys, I am modelling a flow of air and CH4. The gases are supplied to the inlet as follows: 7.3 kg/hr air + 0.43 kg/hr CH4 How can I define this at inlet boundary condition..? I only seem to have a choice of specifying one of the gases and it's mass flow. I can't do both.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pulsating inlet boundary condition	Jason	CFX	1	July 29, 2004 11:47
New topic on same subject - Flow around race car	Tudor Miron	CFX	15	April 2, 2004 06:18
Please help with flow around car modelling!	Tudor Miron	CFX	17	March 19, 2004 19:23
usrbcs for inlet boundary	Jesper Laursen	CFX	2	May 31, 2002 16:34
Inlet diffuser of ramjet	Mohammad Kermani	Main CFD Forum	25	December 29, 2000 18:46

April 22, 2012, 22:16		#2
chg New Member Join Date: Apr 2011 Posts: 11 Rep Power: 15	I think mixture model can do this.

April 23, 2012, 08:23		#4
Matlab69 New Member Andrius Join Date: Mar 2012 Posts: 23 Rep Power: 14	bump......

April 23, 2012, 13:13		#5
Micael Senior Member Micael Join Date: Mar 2009 Location: Canada Posts: 156 Rep Power: 18	Model -> Species Transport You have to define a mixture material. Then you will have a access to "species" tab in your inlet boundary menu. Look into theory and user guide, there is good stuff about that.