CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   dynamic mesh test of a cube fails (https://www.cfd-online.com/Forums/fluent/101779-dynamic-mesh-test-cube-fails.html)

DSMeck May 14, 2012 07:47

dynamic mesh test of a cube fails
 
3 Attachment(s)
Hi,

I try to test a dynamic mesh motion in order to get setup information for a much bigger simulation.
For the test I use some cubes with a surround small volume in order to keep the quality of the mesh. I donīt really know wich dynamic zones have to be created. Can someone show some examples?

I also have problems with the remehing tool of fluent. I tried a lot an I describe you my errors.

1. The small volume moves but the interface is switched to a wall and the volumes are not coupled. Fluent gives this note:
"Note: zone-surface: cannot create surface from sliding interface zone. Creating empty surface."

2. The small volume and the big volume are coupled but I get negative cell volume. I tried to reduce timespteps and changed the remesh setting, but everytime after 0.15s it is over.

I post you some pics.

Thanks for your help.

Regards,
DSMeck


All times are GMT -4. The time now is 22:37.