Y plus values

osamaghani · June 12, 2012, 02:24

I am modelling 2d flow over a bluff body..
Domain consists of Inlet, outlet, geometry(bluff body;wall), ground(wall) and far0field(wall)

1. I am using standard wall treatment and so the range of Y+ values should be in the range of 30 to 300..My question is should this condition be met on all the walls (ground...far-field..) of the domain or just the geometry(the bluff body) of interest... ?

2. To what extent can the Y+ lie out side this range..? I think its not very easy to get all the Y+ values in this range...

for example for 1 simulation Y+ values on bluff bogy are in the range of 4.5 - 600 and the average is 100....do I need to redo the grid?

I would really appreciate of you could also provide some reference

Far · June 12, 2012, 04:47

use scalable wall function instead of standard wall function.

osamaghani · June 12, 2012, 04:53

can you please elaborate....does fluent have that?...btw do these values seem good to you or??

June 12, 2012, 02:24	Y plus values	#1
osamaghani New Member Osama Join Date: Mar 2012 Posts: 26 Rep Power: 14	I am modelling 2d flow over a bluff body.. Domain consists of Inlet, outlet, geometry(bluff body;wall), ground(wall) and far0field(wall) 1. I am using standard wall treatment and so the range of Y+ values should be in the range of 30 to 300..My question is should this condition be met on all the walls (ground...far-field..) of the domain or just the geometry(the bluff body) of interest... ? 2. To what extent can the Y+ lie out side this range..? I think its not very easy to get all the Y+ values in this range... for example for 1 simulation Y+ values on bluff bogy are in the range of 4.5 - 600 and the average is 100....do I need to redo the grid? I would really appreciate of you could also provide some reference

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mapping values from 2D mesh to 3D mesh boundary during runtime	benk	OpenFOAM Programming & Development	1	June 13, 2014 02:39
Numerical errors in nested domain with pre-calculated boundary values	Arnoldinho	OpenFOAM Running, Solving & CFD	3	April 4, 2012 10:31
max node values exceed max element values in contour plot	jason_t	FLUENT	0	August 19, 2009 11:32
exact face values	RubenG	Main CFD Forum	0	June 22, 2009 11:09
strange node values @ solid/fluid interface - help	JB	FLUENT	2	November 1, 2008 12:04

June 12, 2012, 04:47		#2
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	use scalable wall function instead of standard wall function.

June 12, 2012, 04:53		#3
osamaghani New Member Osama Join Date: Mar 2012 Posts: 26 Rep Power: 14	can you please elaborate....does fluent have that?...btw do these values seem good to you or??