CFD Online Discussion Forums

CFD Online Discussion Forums (
-   FLUENT (
-   -   bubble collapse simulation (

ndabir June 21, 2012 12:41

bubble collapse simulation
1 Attachment(s)
Hi all,

I am modeling the water vapor bubble collapse phenomenon inside water close to a wall. The initial pressure inside bubble is 3000 Pa and the ambient pressure is 1 atm. I assume both phases as compressible and use VOF model. I can see the bubble contraction but after some time, I see very small pressures (around 1 Pa) below the bubble close to solid wall. then After some time I get the "floating point exception" and "AMG solver divergence" errors.
I have attached a picture of pressure contours between the bubble boundary and close to wall. The blue parts correspond to small pressures of 1 Pa.

Any idea what should I do? Is it reasonable to have such small pressures below the bubble? I use "simple" method and PRESTO! and first order upwind for others.
Please help I am really in trouble!!

ndabir July 6, 2012 12:36

any idea? I am still stock in this problem

ndabir July 31, 2012 12:59

i have serious problem in getting convergence. the pressure amounts near the bubble and water interface reach low amounts of 1Pa after some iterations. what can I do? Is Fluent capable of simulating bubble collapse?

All times are GMT -4. The time now is 04:20.