|July 10, 2012, 14:56||
porous media in fluent
Join Date: Nov 2011
Posts: 3Rep Power: 7
temperature in porous media is belong to fluid or solid?
i think it is same as velocity or pressure, but i'm doubting about it.
i will so thankful if give me a main reason.
the temperature of solid and fluid are the same or not?
Last edited by arminheidari; July 11, 2012 at 06:22.
|July 11, 2012, 10:29||
Join Date: Jul 2012
Posts: 3Rep Power: 6
User's Guide :: // 7. Cell Zone and Boundary Conditions // 7.2. Cell Zone Conditions // 7.2.3. Porous Media Conditions
"By default, ANSYS FLUENT assumes thermal equilibrium between the porous media solids and multiphase fluid flows. The solids temperature is thus estimated by phase temperatures. However, the solids temperature can also be calculated by a UDS equation (User-Defined Scalar (UDS) Transport Equations)."
Understanding of realization of porosity in Fluent not a problem, a problem to consider radiation on a surface of the porous environment. If it will understand and there will be more or less adequate approach - please write. :-)
|Thread||Thread Starter||Forum||Replies||Last Post|
|Porous Media Simulation with CFX/Fluent||Ghasem||ANSYS||1||May 14, 2013 09:07|
|compressible flow through porous media||Chirag2302||FLUENT||0||March 3, 2012 00:13|
|Porous media flow with diffusion||albertinho||OpenFOAM||0||March 31, 2010 17:14|
|species mass source in porous media ?||PK||FLUENT||0||February 16, 2007 12:12|
|Discrete phase model in porous media||Pradeep||FLUENT||0||February 3, 2006 17:30|