CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Three phase mixture flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 19, 2012, 16:46
Arrow Three phase mixture flow
  #1
New Member
 
Waqas Ahmed
Join Date: Feb 2011
Posts: 18
Rep Power: 15
Waqas Ahmed is on a distinguished road
I have to simulate THREE PHASE SEPARATOR in which water+air+chemical enters into the chamber and water is to taped out from one (01) OUTLET
and Air from second (02) OUTLET and chemical remains in the chamber....

the problem here is that MIXTURE is set on all boundary conditions as well as on OUTLET ...I am unable to select any one (01) fluid at OUTLET......using FLUENT.

Can FLUENT Simulate this problem? plz help
Waqas Ahmed is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Validation for laminar Disperse phase flow shashwat Main CFD Forum 0 April 4, 2008 03:20
how 2 freeze 1 phase flow field & start lagrangian KK CFX 5 February 14, 2008 17:48
low speed compressible two phase flow?? cat CFX 0 November 15, 2005 08:59
swirling two phase flow Ken Schifftner Main CFD Forum 6 July 10, 2000 15:19


All times are GMT -4. The time now is 06:56.