|
[Sponsors] |
July 24, 2012, 20:44 |
[Lost Part]
|
#1 |
New Member
Surpan
Join Date: Jul 2012
Posts: 7
Rep Power: 13 |
hi all !!
i have problem when i use fluent on my mesh..... when i display my grid,, the upper part of my mesh is missing......the upper part should be the pressure inlet......it is control valve geometry......can anyone explain me this problem?? |
|
July 25, 2012, 01:54 |
|
#2 |
Senior Member
Marion
Join Date: Jul 2012
Location: France
Posts: 122
Rep Power: 14 |
Hi,
Have you selected all the parts you want to display in the mesh display panel? Are you sure everything is meshed and you exported it correctly from you meshing package? Marion. |
|
July 25, 2012, 19:26 |
|
#3 | |
New Member
Surpan
Join Date: Jul 2012
Posts: 7
Rep Power: 13 |
Quote:
i found out that it because the missing part didnt get mesh properly i've tried to mesh that geometry but none of the mesh volume type can be used now i've got confuse how to mesh that part.....could you tell me how? |
||
July 26, 2012, 06:46 |
|
#4 |
Senior Member
Marion
Join Date: Jul 2012
Location: France
Posts: 122
Rep Power: 14 |
Ok, so the part was not lost it was just never there :-)
No I cannot tell you how to mesh your volumes, I am not a psychic ;-) |
|
|
|