UDS Neumann Boundary Condition

Richard Parker · August 13, 2012, 08:24

Hi All,

I am trying to set a Neumann Boundary condition in the outlet of a long tube for the concentration gradient of an UDS. This is, I want to implement

d(UDS)/dy=0

In the outlet (or cells adjacent to the outlet boundary). I imagine I should use DEFINE_PROFILE and C_UDSI_G. Has anyone done this in the past either with UDS, pressure, temperature, or anything else?

Thanks!

R

borhan_sd@yahoo.com · August 1, 2013, 05:40

Hi Mr.Richard,I have the same problem,have you solved your problem?
Would you tell me please how?

blackmask · August 1, 2013, 07:44

Look really carefully at the GUI panel and you will find where to set the b.c. for user-defined scalar(s).

August 13, 2012, 08:24	UDS Neumann Boundary Condition	#1
Richard Parker New Member Richard Parker Join Date: Jul 2012 Posts: 10 Rep Power: 15	Hi All, I am trying to set a Neumann Boundary condition in the outlet of a long tube for the concentration gradient of an UDS. This is, I want to implement d(UDS)/dy=0 In the outlet (or cells adjacent to the outlet boundary). I imagine I should use DEFINE_PROFILE and C_UDSI_G. Has anyone done this in the past either with UDS, pressure, temperature, or anything else? Thanks! R

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boundary condition for UDS	Tong Wu	FLUENT	12	February 4, 2020 12:52
How to define boundary condition for UDS ?	Joesphe	FLUENT	0	May 22, 2007 16:35
How to define neuman boundary condition for UDS?	Italiani	FLUENT	0	May 19, 2007 02:33
NEUMANN BOUNDARY CONDITION IN MESHLESS METHODS	Kémelli	Main CFD Forum	2	July 15, 2006 02:41
UDS about Boundary condition	zhou	FLUENT	1	September 15, 2003 02:12

August 1, 2013, 05:40		#2
borhan_sd@yahoo.com Member soodabe Join Date: Apr 2013 Posts: 40 Rep Power: 14	Hi Mr.Richard,I have the same problem,have you solved your problem? Would you tell me please how?

August 1, 2013, 07:44		#3
blackmask Senior Member Join Date: Aug 2011 Posts: 421 Blog Entries: 1 Rep Power: 23	Look really carefully at the GUI panel and you will find where to set the b.c. for user-defined scalar(s).