|
[Sponsors] |
Copying data from boundary condition to another |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 31, 2012, 08:59 |
Copying data from boundary condition to another
|
#1 |
Member
Robert
Join Date: Mar 2011
Location: Warsaw
Posts: 62
Rep Power: 15 |
I have to models - a long pipe with a flow witch gets fully developed at the outlet and the second model which uses this outlet as its inlet.
My question is how can I take the velocity profile from the 1st model and implement it into the inlet in the second model? |
|
February 15, 2021, 14:41 |
|
#2 |
New Member
|
I would also like to find some help on this topic, if anyone knows how to do it I would appreciate some advice. Thanks!
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Assigning data points as boundary condition using fluent | ripong | Fluent UDF and Scheme Programming | 2 | August 31, 2012 06:03 |
inlet velocity boundary condition | murali | CFX | 5 | August 3, 2012 09:56 |
Profile Boundary Condition Data | blackbody | CFX | 3 | March 25, 2010 08:50 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |