CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

skewness correction

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree2Likes
  • 2 Post By sara22

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 30, 2013, 11:33
Question skewness correction
  #1
Member
 
Sa.Baraty
Join Date: Apr 2013
Location: Iran
Posts: 50
Rep Power: 12
sara22 is on a distinguished road
hello my friend.
I want to solve one complex geometry that has many curves.when i use SIMPLEC Method one factor (Skewness correction) appear under the SIMPLEC method in ANSYS Fluents method.
How i must adjust this factor? i dont know which number must be set?1< or 1 , 2, 3,
please help me
miguel.soto and ebrahim27 like this.
sara22 is offline   Reply With Quote

Old   August 27, 2013, 10:56
Default
  #2
New Member
 
miguel
Join Date: Jan 2010
Posts: 11
Rep Power: 16
miguel.soto is on a distinguished road
I have the same problem, donīt know how to set the "skewness correction" under "pressure-velocity coupling" for SIMPLEC method. Fluent documentation and user manual is not clear, there are no tips of how to set this number, and neither which number suits each simulation.

My simulation is a steady-state simulation, with high degree of skewness, involving turbulence. Itīs a rounded shape inside a wind tunnel test section, for a given reynolds number of 2*10^5.

Thanks in advance
miguel.soto is offline   Reply With Quote

Old   September 1, 2013, 08:03
Default
  #3
New Member
 
Harshad
Join Date: May 2013
Location: mUMBAI
Posts: 13
Rep Power: 12
harsh_999 is on a distinguished road
u can do: grid>smooth/swap
do smooth first then hit swap till u see number of faces swapped: 0
u can set minimum skewness as u wish (it depends on which type of mesh u ve used)
u can also convert tetrahedral mesh into poly hedra mesh which will save ur time for complex geometries
good luck
-Harsh
harsh_999 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Floating point exception error Alan OpenFOAM Running, Solving & CFD 11 July 1, 2021 22:51
Mesh skewness correction stainboy OpenFOAM Running, Solving & CFD 5 November 9, 2018 07:45
Timestep and Pressure Correction Relationship in SIMPLE rks171 Main CFD Forum 23 May 4, 2012 02:04
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50
Severe nonorthogonality and severe skewness problem qtian OpenFOAM Running, Solving & CFD 2 January 22, 2008 19:47


All times are GMT -4. The time now is 05:07.