|
[Sponsors] |
November 23, 2012, 08:19 |
please i need help
|
#1 |
New Member
wesam
Join Date: Sep 2012
Posts: 23
Rep Power: 13 |
simulation of inviscid compressible flow over cylinder. using FLUENT 6.3
i have a problem in { Drag convergence } wrong results . THE important Steps that I did in FLUENT : 1-operating pressure =0 pascal 2-Boundary condition_pressure Far-field :MACH=0.4 and pressure calculated from Isentropic relation at MACH=0.4 . and temperature was calculated. 3-solver_Density based . 4-Refrence value: I have a problem at this step. 5-Results - wrong in DRAG CONVERGENCE Please i need help , i do not know where is wrong step . thank you |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|