Changing the Motion Attribute of a Dynamic Zone

banjo · February 10, 2013, 14:59

Hello,

I am running a 2d simulation of a piston in a cylinder and I'm using fluent's in cylinder motion options and a dynamic mesh.

My problem is that I want to bring my piston to top dead centre and stop it there while my simulation runs for a time afterwards.

I think I should be able to do this using a dynamic mesh event. I've looked at the "Changing the Motion Attribute of a Dynamic Zone" option for dynamic mesh event but so far i have been unable to get it to work for me.

When I open the define event dialog box and select "change motion attribute" I am then only giving options to enable or disable sliding or remeshing, neither of which I am using in my analysis.

When I look at the user guide it seems to suggest that i should have a third option to enable or disable "moving" which sounds more like what I am looking for.

Does anyone know a reason why I might be missing the moving option (am I missing somthing?) or can suggest a way I can stop my piston at TDC.

This realy should be a simple issue so I am missing something here.

Please any help is appreciated.

banjo · February 11, 2013, 13:22

Am I looking at this problem the wrong way?

Should I instead be looking at using the piston stroke cutoff option?

Or does anyone else know a better way to solve my problem. Like I said it should be simple.

banjo · February 17, 2013, 14:52

Sorry to bump this guys, but I really need help with this please!!!!

All i need basically is to stop my piston at top dead centre and have it stay there while my simulation runs for a number more time steps. Is there some way I can freeze it there or is there something else I need to look into?

If anyone has half a idea of what approach I should take, please, please let me know!!

February 10, 2013, 14:59	Changing the Motion Attribute of a Dynamic Zone	#1
banjo New Member Join Date: Feb 2013 Posts: 4 Rep Power: 13	Hello, I am running a 2d simulation of a piston in a cylinder and I'm using fluent's in cylinder motion options and a dynamic mesh. My problem is that I want to bring my piston to top dead centre and stop it there while my simulation runs for a time afterwards. I think I should be able to do this using a dynamic mesh event. I've looked at the "Changing the Motion Attribute of a Dynamic Zone" option for dynamic mesh event but so far i have been unable to get it to work for me. When I open the define event dialog box and select "change motion attribute" I am then only giving options to enable or disable sliding or remeshing, neither of which I am using in my analysis. When I look at the user guide it seems to suggest that i should have a third option to enable or disable "moving" which sounds more like what I am looking for. Does anyone know a reason why I might be missing the moving option (am I missing somthing?) or can suggest a way I can stop my piston at TDC. This realy should be a simple issue so I am missing something here. Please any help is appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
[GAMBIT] periodic faces not matching	Aadhavan	ANSYS Meshing & Geometry	6	August 31, 2013 11:25
[Commercial meshers] fluentMeshToFoam multidomain mesh conversion problem	Attesz	OpenFOAM Meshing & Mesh Conversion	12	May 2, 2013 10:52
Problem in running ICEM grid in Openfoam	Tarak	OpenFOAM	6	September 9, 2011 17:51
Problem in IMPORT of ICEM input file in FLUENT	csvirume	FLUENT	2	September 9, 2009 01:08

February 11, 2013, 13:22		#2
banjo New Member Join Date: Feb 2013 Posts: 4 Rep Power: 13	Am I looking at this problem the wrong way? Should I instead be looking at using the piston stroke cutoff option? Or does anyone else know a better way to solve my problem. Like I said it should be simple.

February 17, 2013, 14:52		#3
banjo New Member Join Date: Feb 2013 Posts: 4 Rep Power: 13	Sorry to bump this guys, but I really need help with this please!!!! All i need basically is to stop my piston at top dead centre and have it stay there while my simulation runs for a number more time steps. Is there some way I can freeze it there or is there something else I need to look into? If anyone has half a idea of what approach I should take, please, please let me know!!