CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Eulerian model with DDPM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 20, 2013, 05:20
Default Eulerian model with DDPM
  #1
New Member
 
Luca Pirani
Join Date: Jun 2012
Posts: 5
Rep Power: 13
Lucaaa is on a distinguished road
Hello to all,
first of all I apologize for my English. Let me explain my problem. I'm trying to simulate with FLUENT a fluid bed reactor. I used the Eulerian-Eulerian multiphase model and thus far there have been no problems. Now, however, I was interested in assessing the trajectories of the particles inside the reactor, and then use the DPM model. In particular the guide I read that you can use the Eulerian model including the DDPM. when I go to set up my problem with these parameters, launch the simulation and immediately finds a divergence. How can I simulate this my model? I hope I was clear in explaining. I also tried to do the following:
-launch the simulation without introducing any particle so as to have a converged solution;
-insert the particle inside the reactor by selecting the DPM menu templates.

is correct? I thank you in advance for your answer.
Hello,
Luca
Lucaaa is offline   Reply With Quote

Old   February 20, 2013, 09:53
Default hi
  #2
Senior Member
 
shoeb khan
Join Date: Nov 2011
Posts: 179
Rep Power: 14
shk12345 is on a distinguished road
The problem with DDPM model is that it always always diverges.
I have tried it a lot but always it diverges.

But according you one theory you have to first solve DPM model and then use the data from there to put in DDPM model.
U have to interpolate flow and particle trajctories from DPM and put in DDPM.

Tell me if it works.

Regards
shk
shk12345 is offline   Reply With Quote

Old   February 20, 2013, 09:56
Default
  #3
New Member
 
Luca Pirani
Join Date: Jun 2012
Posts: 5
Rep Power: 13
Lucaaa is on a distinguished road
thanks for the reply. I'm not sure how, but now it is simulating and seems to be fine. soon as I finish and let you know if I try with the method that you told me. Thank you again for your response

Luca
Lucaaa is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 06:36
question about eulerian model for packed bed rone FLUENT 2 July 19, 2007 21:58
Mass and het transfer using eulerian model Pablo FLUENT 0 February 16, 2007 09:36
the Eulerian model and the lower volume fraction hx li FLUENT 2 October 27, 2005 07:17
Strain Rate in eulerian model galeazzo FLUENT 0 January 25, 2005 08:52


All times are GMT -4. The time now is 04:44.