CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

problem with bodies transferred from the mesher

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 21, 2013, 21:47
Default problem with bodies transferred from the mesher
  #1
Member
 
yahya
Join Date: Jul 2012
Posts: 43
Rep Power: 13
yahya is on a distinguished road
I built a huge model using designmodeler that consist of more than 300 bodies, and then I did my mesh using meshing application available in ANSYS 14, in addition, I have created a named selection for several faces and bodies.
However, when i transfer it to fluent all the bodies is transferred by itself, i.e. like if I have 250 bodies as interior each one is transferred by itself and i need to specify it as interior 250 time in the boundary conditions box in fluent, in addition, for the named selections if I selected 10 faces as walls, when I transfer it to fluent each one is transferred by itself as wall (not all as package).
So in summary, i need when I transfer the model to be transferred as one package for interior and one package for each named selection, because this problem take long time to upload the geometry.

best regards,
Yahya
yahya is offline   Reply With Quote

Old   February 27, 2013, 14:35
Default DM
  #2
New Member
 
sp
Join Date: Jul 2011
Posts: 23
Rep Power: 14
chaosh is on a distinguished road
Did you combine all these bodies into one 'part' in Design Modeler before meshing? If not, you should - unless you plan to have a sliding interface type situation.
chaosh is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
area does not match neighbour by ... % -- possible face ordering problem St.Pacholak OpenFOAM 10 February 7, 2024 22:50
conduction problem venkataramana OpenFOAM 3 December 1, 2013 08:30
UDF compiling problem Wouter Fluent UDF and Scheme Programming 6 June 6, 2012 05:43
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 07:29
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 20:13


All times are GMT -4. The time now is 01:19.