 |
 |
 |
|
|
|
[Sponsors] | ||||
February 24, 2013, 04:42
|
Viscosity for Granular Temperature Model
|
#1 |
|
Member
Join Date: Apr 2012
Posts: 48
Rep Power: 15  |
I am using Fluent 6.3.26 for simulation of two phase flow through a circular tube using Granular Temperature Model. the literature i am using has not specified viscosity for the secondary phase. So what should be the input for viscosity or what do I do with the viscosity input box available in the Material List when i define its density? Can anyone please suggest. Thanks in advance.
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem in modified pisoFoam with temperature equation + thermophysical model | Matt_B | OpenFOAM Programming & Development | 17 | November 7, 2019 10:23 |
| Viscosity model in the twoPhaseEulerFoam | enoch | OpenFOAM Programming & Development | 3 | March 17, 2016 10:53 |
| Viscosity ratio in gamma-theta transition model based on k-w sst turb model | Qiaol618 | Main CFD Forum | 8 | June 9, 2012 07:43 |
| Too low temperature at combustor outlet | romekr | FLUENT | 2 | February 6, 2012 11:02 |
| Piecewise viscosity model | awacs | OpenFOAM Running, Solving & CFD | 3 | June 22, 2010 00:10 |
Linear Mode
