|
[Sponsors] |
January 31, 2017, 12:25 |
risultati in output
|
#1 |
New Member
Francesco Tronci
Join Date: Jan 2017
Posts: 2
Rep Power: 0 |
Ciao ragazzi, sono un nuovo utente e sto usando da poco ansys Fluent.
Molto brevemente, sto simulando l'adsorbimento della CO2 di una colonna contenente materiale adsorbente. Ovviamente in uscita il software mi restituisce (li ho importati su un foglio excel) i valori delle singole grandezze per ogni cella/nodo. Come faccio a riportare, per esempio la CO2 nella sezione di ingresso o in uscita? Devo fare una media dei valori della grandezza su tutti i nodi della sezione che mi interessa? Grazie in anticipo Hello guys, I'm a new user and I start using recently ansys Fluent. I'm simulating the adsorption of CO2 in a column containing adsorbent material. Software gives me (I imported them on an excel sheet) the values of the individual variables for each cell / node. How can I bring for example the CO2 in the input section or output? Average of the magnitude values on all nodes of the section that interests me? Thanks in advance |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[swak4Foam] outputTime in Swak function | immortality | OpenFOAM Community Contributions | 20 | October 6, 2022 12:08 |
writing execFlowFunctionObjects | immortality | OpenFOAM Post-Processing | 30 | September 15, 2013 06:16 |
RNG diverged during the analysis the flow over a multi element airfoil, why? | s.m | OpenFOAM Running, Solving & CFD | 0 | August 5, 2013 08:39 |
mixerVesselAMI2D's mass is not balancing | sharonyue | OpenFOAM Running, Solving & CFD | 6 | June 10, 2013 09:34 |
lift and drag on ship superstructures | vaina74 | OpenFOAM Running, Solving & CFD | 3 | June 8, 2010 12:30 |