CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Problem on Input heat into a Particle with DPM (https://www.cfd-online.com/Forums/fluent/115701-problem-input-heat-into-particle-dpm.html)

npl April 4, 2013 23:39
Problem on Input heat into a Particle with DPM
 
Hi,

I want to apply a thermal load on the particles travelling through air. Should i use function of Define_DPM_Law.

However when i change the temperature of particle by command P_T(p) in Define_DPM_Law, the temperatue of particle still is the same with that of air.

What should i do?

msaeedsadeghi April 6, 2013 09:09
You should use:
DEFINE_DPM_HEAT_MASS

npl April 6, 2013 22:47
*DEFINE_DPM_HEAT_MASS can not be applied in the inert particle. My problem is about the heating process of solid particle.


All times are GMT -4. The time now is 19:16.