CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Wall boundary condition.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 10, 2013, 13:13
Unhappy Wall boundary condition.
  #1
New Member
 
Join Date: Apr 2013
Posts: 3
Rep Power: 12
pulkitkbra22 is on a distinguished road
i have a cylinder with a u-shape extrude cut through which hot water flows through the inlet and outlet ports.

INLET IS A VELOCITY INLET where I have defined velocity and temperature. Outlet is outflow.

Ansys 14.5 creates 2 contact surface b/w water and cylinder. What boundary condition should I give on these walls.
The conditions I am giving now does not change the temperature of water i.e. water comes out at its inlet temperature only.
pulkitkbra22 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Natural convection in a closed domain STILL NEEDING help! Yr0gErG FLUENT 4 December 2, 2019 01:04
Applying Rotational Boundary Condition on Surface with Radial Wall tango711 CFX 16 October 9, 2018 08:01
Domain Imbalance HMR CFX 5 October 10, 2016 06:57
isothermal wall boundary condition Neil Main CFD Forum 3 November 9, 2015 03:34
Dirichlet boundary condition for additional variable on the wall ftab CFX 13 January 27, 2013 13:24


All times are GMT -4. The time now is 11:17.