CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Trouble with big domain of study,

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 15, 2013, 12:40
Question Trouble with big domain of study,
  #1
New Member
 
Johnny P.
Join Date: May 2013
Posts: 4
Rep Power: 12
johnnyp is on a distinguished road
Good afternoon,

I have a big trouble with a big model. So, I decide to decompose the model in three sub-models.

My question is how I can run the study only one time, but using different models in the next manner:

-on the first model I will apply velocity_inlet and pressure_outlet
-on the second model I will apply as input instead of velocity, the pressure_outlet from previous model and as output pressure_outlet2
-on the third model I will apply as input instead of velocity, the pressure_outlet2 from previous model and as output pressure_outlet3

If somebody have other idea or suggestion how to do that or equivalent solution, please help me.

Thanks in advance to all community for support.

Best regards.

P.S. I used ANSYS 14.5 with corresponding Fluent.
johnnyp is offline   Reply With Quote

Old   May 15, 2013, 21:35
Default Hope this can help you
  #2
Member
 
刘峰
Join Date: Mar 2013
Posts: 31
Rep Power: 13
Liufeng_ustb is on a distinguished road
Quote:
Originally Posted by johnnyp View Post
Good afternoon,

I have a big trouble with a big model. So, I decide to decompose the model in three sub-models.

My question is how I can run the study only one time, but using different models in the next manner:

-on the first model I will apply velocity_inlet and pressure_outlet
-on the second model I will apply as input instead of velocity, the pressure_outlet from previous model and as output pressure_outlet2
-on the third model I will apply as input instead of velocity, the pressure_outlet2 from previous model and as output pressure_outlet3

If somebody have other idea or suggestion how to do that or equivalent solution, please help me.

Thanks in advance to all community for support.

Best regards.

P.S. I used ANSYS 14.5 with corresponding Fluent.
Hi, Johnny. I think your meaning is how you can revise slightly with your case and accomplish your simulation.

I think you can initialize. That is to say, when you finish the calculation of your first model, you do not need to reread your mesh or case, you can directly modify your model in Boundary Conditions, and initialize.

Recently, I am doing my undergraduate thesis. Because it always is of divergence, so I need to continually revise some options if it happens this situation. For every try, it is impossible for me to start a new setting for the whole process. So I use initilize when I fail every time.

I hope this can help you.

All the best
Liufeng_ustb is offline   Reply With Quote

Old   May 15, 2013, 22:28
Default
  #3
Senior Member
 
Join Date: Aug 2011
Posts: 421
Blog Entries: 1
Rep Power: 21
blackmask will become famous soon enough
You did not get it. What Johnny wants is to decompose a large problems into several uncoupled or loosely coupled problems.

This however, depends on the dominant feature of the flow. For parabolic dominant flow like boundary layer it is feasible to cut the computational domain into several pieces then solve them sequentially. For other kind of problems I would suggest you looking for more powerful computational resources. You would work around your problem with the technique describe in this thread (http://www.cfd-online.com/Forums/flu...-boundary.html) but I prefer the hard(ware) way.
blackmask is offline   Reply With Quote

Old   May 16, 2013, 00:19
Default
  #4
New Member
 
Johnny P.
Join Date: May 2013
Posts: 4
Rep Power: 12
johnnyp is on a distinguished road
Good morning,

Thanks for yours advice and sugestion. This is what I´m looking for (thanks for link blackmask). I will try to implement the routine, and we keep in touch.

Thanks in advance for support to all comunity. If somebody have other ideea or sugestion beside of recommandation made by blackmask, I waiting.

Best regards.
johnnyp is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain format problem on airfoil flow simulation andrenonaka CFX 14 December 7, 2015 01:42
Default domain jaho CFX 5 February 16, 2014 01:00
Material identification between a flow domain and a porous domain Ervideiro CFX 1 June 1, 2010 10:50
rotating domain in rotating domain, different axis Robert Stringer CFX 3 December 4, 2006 08:04
Solver error message!!! IoSa CFX 1 September 14, 2006 05:48


All times are GMT -4. The time now is 13:38.