some results with Kl-kw-w transition model
 

Transition model = K-Kl-omega
Reynolds number = 5e04
Turbulence Intensity = 0.4%
Time step is taken in such a way so that one cycle is modelled in 100 time steps.
Cylinder is modeled as moving zone and purpose of this study is to observe the effects of upstream wakes on boundary layer transition in downstream low pressure turbine rotor profile.

http://imageshack.us/a/img17/3893/71091220.png

http://imageshack.us/a/img856/6848/26828755.png

http://imageshack.us/a/img829/2482/34627045.png

http://imageshack.us/a/img89/3019/35305908.png


http://imageshack.us/a/img594/8936/55917335.png
http://imageshack.us/a/img59/9737/44163896.png
http://imageshack.us/a/img12/9196/93140488.png
http://imageshack.us/a/img14/5733/19016939.png
http://imageshack.us/a/img854/5154/zerodju.png

another view
 

http://imageshack.us/a/img194/8649/1full.png
http://imageshack.us/a/img823/7105/2full.png
http://imageshack.us/a/img856/290/3fullm.png
http://imageshack.us/a/img23/4741/4full.png
http://imageshack.us/a/img801/2556/5full.png
http://imageshack.us/a/img855/7503/6full.png
http://imageshack.us/a/img809/9452/7full.png
http://imageshack.us/a/img812/5871/8full.png
http://imageshack.us/a/img849/5444/9full.png
http://imageshack.us/a/img89/4636/zerofull.png

nice, very nice

i was testing cfd-post and i made this yesterday: http://youtu.be/ghl6WKlNWnA i don't know about the accuracy of the resultsbut cfd-post is really a powerful tool

How long did it take to create that video? Must be hours, right?

Yes. Around 3.3 hours for one cycle.

it took me days for that video... more than 400 time steps, and the mesh is 1.2 million nodes

400 time steps! wow ;)