ICEM>fluent Error- while importing mesh

shookybal · July 13, 2013, 14:52

Hi Guys,

I have created a 3D mesh in ICEM and recieve the following error while trying to import it to fluent:

Building...
mesh
Error:
Partition: cell count = 0; count must be greater than zero.
Error Object: #f

Primitive Error at Node 0:
Partition: cell count = 0; count must be greater than zero.

Primitive Error at Node 1:
Partition: cell count = 0; count must be greater than zero.

Primitive Error at Node 2:
Partition: cell count = 0; count must be greater than zero.

Primitive Error at Node 3:
Partition: cell count = 0; count must be greater than zero.

I am new to ICEM and probably doing something wrong.
Your help will be appreciated.

Shooky

granzoporo · December 3, 2013, 11:35

I'm getting the same error... did you find any solution? :P

shookybal · December 3, 2013, 14:47

make sure you import a 3D grid into fluent 3D.
I tried to open it in 2D mode by mistake

ajayvarma5 · January 7, 2016, 15:07

ive created a 2d aerofoil in icem but while importing it into fluent im getting same error message that cell count is zero and it has to be increased. please help me

shookybal · January 20, 2016, 11:30

maybe you are in 3D mode.

ajayvarma5 · February 23, 2016, 02:12

Quote:

Originally Posted by shookybal

maybe you are in 3D mode.

thanx man i got it

July 13, 2013, 14:52	ICEM>fluent Error- while importing mesh	#1
shookybal New Member shacharbala Join Date: May 2011 Posts: 11 Rep Power: 16	Hi Guys, I have created a 3D mesh in ICEM and recieve the following error while trying to import it to fluent: Building... mesh Error: Partition: cell count = 0; count must be greater than zero. Error Object: #f Primitive Error at Node 0: Partition: cell count = 0; count must be greater than zero. Primitive Error at Node 1: Partition: cell count = 0; count must be greater than zero. Primitive Error at Node 2: Partition: cell count = 0; count must be greater than zero. Primitive Error at Node 3: Partition: cell count = 0; count must be greater than zero. I am new to ICEM and probably doing something wrong. Your help will be appreciated. Shooky

December 3, 2013, 14:47	yes	#3
shookybal New Member shacharbala Join Date: May 2011 Posts: 11 Rep Power: 16	make sure you import a 3D grid into fluent 3D. I tried to open it in 2D mode by mistake granzoporo likes this.

January 7, 2016, 15:07	same error	#4
ajayvarma5 New Member ajay varma Join Date: Dec 2015 Location: india Posts: 7 Rep Power: 12	ive created a 2d aerofoil in icem but while importing it into fluent im getting same error message that cell count is zero and it has to be increased. please help me

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit problems	Althea	FLUENT	22	January 4, 2017 04:19
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 05:24
[ICEM] Importing Mesh From ICEM	JoanaAndrade	ANSYS Meshing & Geometry	1	March 22, 2013 06:23
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM	kawamatt2	ANSYS Meshing & Geometry	17	December 20, 2011 12:45
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 22:11

December 3, 2013, 11:35		#2
granzoporo New Member Davide Furlani Join Date: Sep 2013 Location: Copenhagen Posts: 4 Rep Power: 14	I'm getting the same error... did you find any solution? :P

January 20, 2016, 11:30		#5
shookybal New Member shacharbala Join Date: May 2011 Posts: 11 Rep Power: 16	maybe you are in 3D mode.