|
[Sponsors] |
July 13, 2013, 13:52 |
ICEM>fluent Error- while importing mesh
|
#1 |
New Member
shacharbala
Join Date: May 2011
Posts: 11
Rep Power: 14 |
Hi Guys,
I have created a 3D mesh in ICEM and recieve the following error while trying to import it to fluent: Building... mesh Error: Partition: cell count = 0; count must be greater than zero. Error Object: #f Primitive Error at Node 0: Partition: cell count = 0; count must be greater than zero. Primitive Error at Node 1: Partition: cell count = 0; count must be greater than zero. Primitive Error at Node 2: Partition: cell count = 0; count must be greater than zero. Primitive Error at Node 3: Partition: cell count = 0; count must be greater than zero. I am new to ICEM and probably doing something wrong. Your help will be appreciated. Shooky |
|
December 3, 2013, 10:35 |
|
#2 |
New Member
Davide Furlani
Join Date: Sep 2013
Location: Copenhagen
Posts: 4
Rep Power: 12 |
I'm getting the same error... did you find any solution? :P
|
|
December 3, 2013, 13:47 |
yes
|
#3 |
New Member
shacharbala
Join Date: May 2011
Posts: 11
Rep Power: 14 |
make sure you import a 3D grid into fluent 3D.
I tried to open it in 2D mode by mistake |
|
January 7, 2016, 14:07 |
same error
|
#4 |
New Member
ajay varma
Join Date: Dec 2015
Location: india
Posts: 7
Rep Power: 10 |
ive created a 2d aerofoil in icem but while importing it into fluent im getting same error message that cell count is zero and it has to be increased. please help me
|
|
January 20, 2016, 10:30 |
|
#5 |
New Member
shacharbala
Join Date: May 2011
Posts: 11
Rep Power: 14 |
maybe you are in 3D mode.
|
|
February 23, 2016, 01:12 |
|
#6 |
New Member
ajay varma
Join Date: Dec 2015
Location: india
Posts: 7
Rep Power: 10 |
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation | tommymoose | ANSYS Meshing & Geometry | 48 | April 15, 2013 04:24 |
[ICEM] Importing Mesh From ICEM | JoanaAndrade | ANSYS Meshing & Geometry | 1 | March 22, 2013 05:23 |
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM | kawamatt2 | ANSYS Meshing & Geometry | 17 | December 20, 2011 11:45 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |