Help post processing Fleunt
there is anyone who could help me to represent my result as is present on the site of ANSYS (you go to the site Ansys (http://www.ansys.com/Products/Simula...YS+Fluent#/0/3) then click on the "Examples" menu on the left then choose "jet in cross flow") please if anyone has any help I really need I have an almost identical simulation
|
|
Thanks Ales for your replay,
This is the distribution of temperature fields in the box (starting from inlet to outlet) I want to make a video of the temperature distribution in the box (the simulation is in steady mode), do you have an idea please |
A video of a steady-state simulation? I dont know how to do this and why. Sorry.
|
:p yes a video of a steady simulation :) its strange but it exists but i don't now how i can do it :(
Thanks Alex, if you have an idea do not hesitate to post it |
Under "Calculation activities" you can set up "solution animations".
Then after solving, you can save a movie or a picture sequence under "graphics and animations" -> "solution animation playback". It seem a bit tricky at least without consulting the manual, but it gets the job done. |
Thank you Alex for your suggestion, I'll try your suggestion and get back here :)
|
All times are GMT -4. The time now is 08:38. |