CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Help!! Minimum PDF table temperature read

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 14, 2013, 14:15
Default Help!! Minimum PDF table temperature read
  #1
New Member
 
Clan McKenzie
Join Date: Aug 2013
Posts: 7
Rep Power: 12
burritolover is on a distinguished road
Hello Everyone!

I desperately need assistance with the following problem. I have been trying to do combustion analysis for a couple of months now and have a repeating problem. During the solution portion of the simulation on FLUENT 13.0 I have the following read out on each time step...
"Minimum PDF table temperature in 9893 cells on zone 3"
The number of cells fluctuates greatly. I have a video of each step that I have done at the link below.

https://www.youtube.com/watch?v=-CDNB22fWFo

I have tried increasing the mesh, increasing the fuel and oxid temperatures without any results
DISREGARD THE FLOW RATES IN THE VIDEO! I have corrected them and they are not connected to the error.

THANK YOU IN ADVANCE!
burritolover is offline   Reply With Quote

Old   August 15, 2013, 01:47
Default
  #2
New Member
 
Graham
Join Date: Apr 2009
Posts: 7
Rep Power: 16
cguy is on a distinguished road
Hello,
The text interface (tui) that you showed looks like species transport and not non-premixed or partially-premixed. With the non-adiabatic non-premixed model, you should have an option called non-premixed-combustion-expert and the heat loss parameter is in there. Once you lower it, you have to re-generate the pdf table.
Note that with just a few cells hitting the min table temp, you can really ignore this - it will only have a really small effect on the solution.
g
cguy is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
whats the cause of error? immortality OpenFOAM Running, Solving & CFD 13 March 24, 2021 08:15
High temperature methane+air Peter FLUENT 5 January 26, 2009 19:04
Phase locked average in run time panara OpenFOAM 2 February 20, 2008 15:37
Read table chris1980 OpenFOAM Running, Solving & CFD 1 August 31, 2006 04:32
Ist it only me that cant read the user guide pdf olle53 OpenFOAM 5 April 5, 2006 23:14


All times are GMT -4. The time now is 09:44.