|
[Sponsors] |
October 27, 2013, 23:40 |
Boundary condition for external flow
|
#1 |
New Member
Lee,Dong Beom
Join Date: Apr 2013
Posts: 21
Rep Power: 13 |
Hello~Everybody~
I am simulating the flow in way of after body of ship. To make efficient modeling,I just modeled it as after body of ship. also the motion of afterbody was made as oscillating vertically. The detail description of sheme is as below. In this modeling, I have some question. I set up the inlet as velocity inlet and the outlet as pressure outlet. however when I run the model, I found some convergence error as I attached. and there is some message that reversed flow are existed in outflow. so I am wondering my boundary condition is not correct or not. and Should I change the boundary condition from pressure outlet to outflow? If anyone have some good idea, please let me know. It will be very appreciated. Everybody has a good day~ |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
Question on the boundary condition for open channel flow, please help! | ripperjack | OpenFOAM Running, Solving & CFD | 0 | September 13, 2013 11:44 |
Volume of Flow Rate (VFR) boundary condition | therockyy | FLOW-3D | 0 | May 23, 2011 14:19 |
RPM in Wind Turbine | Pankaj | CFX | 9 | November 23, 2009 04:05 |
How can apply mass flow rate boundary condition? | Sima | Phoenics | 1 | December 1, 2007 18:55 |