CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Two outlet boundary condition for a pipe,

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 10, 2013, 08:52
Default Two outlet boundary condition for a pipe,
  #1
New Member
 
Ugur
Join Date: Aug 2013
Posts: 20
Rep Power: 5
Ozora is on a distinguished road
For example in a room i hava a pipe, which air went outside through this pide. What can i use for inlet and outlet condition ? i cant make both of them outflow right ? or pressure outlet ?
Ozora is offline   Reply With Quote

Old   December 10, 2013, 09:00
Default
  #2
New Member
 
misterdd
Join Date: Dec 2012
Posts: 12
Rep Power: 5
misterdd is on a distinguished road
if you have a pipe in a room and you want the airflow to leave the pipe first and then room then you should define some inlet condition at pipe exit and outlet condition at the room exit.
misterdd is offline   Reply With Quote

Old   December 10, 2013, 09:07
Default
  #3
New Member
 
Ugur
Join Date: Aug 2013
Posts: 20
Rep Power: 5
Ozora is on a distinguished road
I know that but the problem is, i have a fan in the room. And i dont push the air to pipe. It is not in my control actually there is no vacuum or anything. I cant upload an image but a few hours later i can
Ozora is offline   Reply With Quote

Old   December 12, 2013, 04:41
Default
  #4
New Member
 
Ugur
Join Date: Aug 2013
Posts: 20
Rep Power: 5
Ozora is on a distinguished road
Short cylinder in the middle of ceiling is burner. 4 circles are fun which circulate the air in the room and the other long cylinder is for exhaust gas.

So i my question about long cylinder how can i set boundry conditions ? Also i need ideas about how to simulate this model. Firstly i simulate burner and than i will add boundry conditions for all model. Is this correct way ?

Thank you very much,
Attached Images
File Type: jpg firin.jpg (56.7 KB, 5 views)
Ozora is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radiation interface hinca CFX 15 January 26, 2014 18:11
Low Mixing time Problem Mavier CFX 5 April 29, 2013 00:00
Transient outlet boundary condition problem jwillie2000 CFX 1 December 7, 2009 18:07
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
Outlet boundary condition CN FLUENT 6 May 22, 2005 09:37


All times are GMT -4. The time now is 18:54.