air blast atomizer problem

lili · May 20, 2012, 02:43

hi
i am doing a DPM problem with air-balst-atomizer as injection type. the tracking is unsteady and coupled. I enter the start time as 0 and stop time as 400 s but after some iteration there isnt any injected particles and the number o ftracked is constant. when i change the stop time as another value less or more some particles are injected but again the number tracked will be constant. why this happens?

sanberoyal · January 30, 2014, 05:32

In the SET INJECTION PROPERTIES dilog box select .. number of particle streams as 60 and stop time as 100... then run and see.

diamondx · January 30, 2014, 09:23

What time step are you using ?

May 20, 2012, 02:43	air blast atomizer problem	#1
lili Member leila Join Date: Jul 2011 Posts: 35 Rep Power: 14	hi i am doing a DPM problem with air-balst-atomizer as injection type. the tracking is unsteady and coupled. I enter the start time as 0 and stop time as 400 s but after some iteration there isnt any injected particles and the number o ftracked is constant. when i change the stop time as another value less or more some particles are injected but again the number tracked will be constant. why this happens?

January 30, 2014, 09:23		#3
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 28	What time step are you using ? __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
air problem	fba	FLOW-3D	4	April 15, 2015 01:06
tank filling problem with compressible air	Cle	FLUENT	1	March 8, 2012 23:02
Problem in implementing cht	tilek	CFX	3	May 8, 2011 08:39
air bubble is disappear increasing time using vof	xujjun	CFX	9	June 9, 2009 07:59
Problem of air bubbles in water. Please help !!!	xc	FLUENT	4	February 6, 2008 05:05

January 30, 2014, 05:32		#2
sanberoyal New Member Sandeep Nagalikar Join Date: Dec 2013 Posts: 3 Rep Power: 12	In the SET INJECTION PROPERTIES dilog box select .. number of particle streams as 60 and stop time as 100... then run and see.