 |
 |
 |
|
|
|
[Sponsors] | ||||
November 18, 2016, 10:22
|
Loss coefficient
|
#1 |
|
New Member
Join Date: Nov 2016
Posts: 3
Rep Power: 9  |
If I model a 90 degree bend (turbulent where v=1m/s and d=0.01m) and I get a pressure reading from a monitor before the bend (e.g. 1500Pa), and a pressure reading from another monitor after the bend (e.g. 500Pa) how do I work out the minor loss coefficient from this?
|
|
|
|
|
 |
| Tags |
| bend, loss coefficient, pressure |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CFD by anderson, chp 10.... supersonic flow over flat plate | varunjain89 | Main CFD Forum | 18 | May 11, 2018 07:31 |
| Loss Coefficient for Opening Boundary Condition | Liliane Maciel | CFX | 1 | February 18, 2018 02:05 |
| Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 06:28 |
| Porous loss model coefficient query | siw | CFX | 7 | August 24, 2011 07:41 |
| Automotive test case | vinz | OpenFOAM Running, Solving & CFD | 98 | October 27, 2008 08:43 |
Linear Mode
