XY plot - Ansys Fluent

mm391 · February 19, 2014, 05:55

I have an impinging jet model. My jet exits horizontally and I want to plot the X-Direction velocities on the Y-Axis and the X-Coordinates from the nozzle exit to the impinging plate along the X-Axis all for one specific height? i.e. all the x velocities for the centerline of the jet from the nozzle exit to the impingement plate? Can anyne suggest how I maybe able to do that?

Thanks very much.

Mark

duri · February 20, 2014, 07:26

Unchek position on x axis or y axis in XY plot gui panel. This will allow you to select x and y coordinate of your interest.

metaliat93 · December 23, 2019, 11:04

Quote:

Originally Posted by duri

Unchek position on x axis or y axis in XY plot gui panel. This will allow you to select x and y coordinate of your interest.

what about 3d model? how to set line?

February 19, 2014, 05:55	XY plot - Ansys Fluent	#1
mm391 New Member Mark Join Date: Oct 2013 Location: Brighton Posts: 13 Rep Power: 14	I have an impinging jet model. My jet exits horizontally and I want to plot the X-Direction velocities on the Y-Axis and the X-Coordinates from the nozzle exit to the impinging plate along the X-Axis all for one specific height? i.e. all the x velocities for the centerline of the jet from the nozzle exit to the impingement plate? Can anyne suggest how I maybe able to do that? Thanks very much. Mark

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
drag coefficient in ansys fluent 12.0	krishna	FLUENT	19	April 12, 2018 01:49
The fluent stopped and errors with "Emergency: received SIGHUP signal"	yuyuxuan	FLUENT	0	December 3, 2013 23:56
Fluent v6.3.26 better than Ansys v12.1	jemyungcha	FLUENT	2	August 25, 2012 00:10
Hot News: Ansys Buys Fluent	Jonas Larsson	Main CFD Forum	23	February 22, 2006 18:12
import Fluent data&case to ANSYS	Vlad S	FLUENT	0	April 2, 2003 06:49

February 20, 2014, 07:26		#2
duri Senior Member duri Join Date: May 2010 Posts: 245 Rep Power: 18	Unchek position on x axis or y axis in XY plot gui panel. This will allow you to select x and y coordinate of your interest.