|
[Sponsors] |
March 3, 2014, 09:41 |
Help!! SPecies transport- CO air mixture
|
#1 |
New Member
Prashant Thaker
Join Date: Jul 2013
Location: guwahati, India
Posts: 15
Rep Power: 12 |
hi users,
i am modeling pollutant transport without reactions. In the species transport model, I turn on 'inlet diffusion' with CO-air as the mixture template. I have one inlet (velocity inlet) for the ambient air where i do not specify any mass fraction of species. the other inlet is a road which i model as mass flow inlet with constant mass flux. Here I specify only CO mass fraction as 1. In the results, i get very high CO concentration ( about 10^-4 kmol/m3) Where am I going wrong?? Please help, Thanks in advance, Prashant |
|
October 15, 2020, 08:14 |
|
#2 |
Member
Join Date: Apr 2020
Posts: 76
Rep Power: 6 |
Hi Prashant
Did you find a solution? I have the same issue, the concentration is quite high. Could you please show me how you resolved the source inlet property? Thanks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Regarding Species Transport for Diffusion | kayne91 | FLUENT | 0 | September 8, 2013 01:12 |
confused with the coupled VOF and species transport model | yfling27 | FLUENT | 0 | November 30, 2012 02:18 |
chemical reaction and species transport | mohamad3564 | FLUENT | 0 | June 11, 2012 03:58 |
Can Fluent handle species transport in multi-phase | Roger | FLUENT | 1 | January 30, 2003 19:12 |
Do I Break up "Air" in Species Transport? | Julie | FLUENT | 2 | August 21, 2002 00:15 |