 |
 |
 |
|
|
|
[Sponsors] | ||||
March 4, 2014, 01:09
|
Creating thin slice out of a cylinder
|
#1 |
|
New Member
Join Date: Oct 2010
Posts: 20
Rep Power: 15  |
Dear all,
I want to create a thin slice (a thin volume) out of a cylinder (of 0.3m dia. and 0.4m length) which is should be around 10mm thick (5mm on either side, and running down the full length of the cylinder) for the purpose of post processing. Is it possible to do that in fluent? I'm comfortable with creating planes, etc., but have no idea to create a thin slice. Your comments or reference on above will be appreciated. Regards, Lakhi. |
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] SnappHexMesh Mesh creating a Mesh inside a Cylinder? | abu | OpenFOAM Meshing & Mesh Conversion | 1 | April 4, 2017 09:57 |
| Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam) | cfdonline2mohsen | OpenFOAM | 3 | October 21, 2013 09:28 |
| [blockMesh] Creating a Cylinder | m.maneshi | OpenFOAM Meshing & Mesh Conversion | 1 | March 10, 2011 04:31 |
| [blockMesh] Specifying boundary faces failes in blockMesh | blaise | OpenFOAM Meshing & Mesh Conversion | 0 | May 10, 2010 03:56 |
| Creating cylinder in STAR-CD | Sachin | Siemens | 2 | March 6, 2008 02:53 |
Linear Mode
