CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Iteration Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 20, 2014, 11:09
Default Iteration Problem
New Member
Join Date: Dec 2013
Posts: 26
Rep Power: 5
Ad.Y is on a distinguished road
I am simulating an unsteady 3D transient diesel engine combustion process using Fluent 14.0 installed in windows 7 64-bit system.

I run the simulations using 3 different injection files which are A, B and C. However, after running 548 time-steps and 100 iterations per time-step, simulation A and B works well.

Unfortunately, for simulation C, it stopped in the middle of simulation. It stated there "calculating solution" but it never move or calculate further even after 1 or 2 hours. I re-run the same injection file C using 32-bit windows 7 and it works fantastically.

Can I know what's going wrong? Any problem or error with this? I attached the picture as below for reference.

Thank you.
Attached Images
File Type: jpg Image.jpg (47.0 KB, 10 views)
Ad.Y is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
how to increase "Newton Pressure Iteration Limit" kus CFX 9 April 21, 2013 01:54
Can I solve this problem by Fluent? Kai_kc FLUENT 1 October 27, 2010 05:29
The problem of inner iteration when calling the subroutine guoxj CFX 18 October 23, 2010 20:37
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13
Creating, loop or iteration using expression edito Jan CFX 3 July 28, 2003 11:01

All times are GMT -4. The time now is 05:32.