Iteration Problem -- CFD Online Discussion Forums

March 20, 2014, 10:09

Iteration Problem

Ad.Y

New Member

Join Date: Dec 2013

Posts: 26

Rep Power: 12

I am simulating an unsteady 3D transient diesel engine combustion process using Fluent 14.0 installed in windows 7 64-bit system.

I run the simulations using 3 different injection files which are A, B and C. However, after running 548 time-steps and 100 iterations per time-step, simulation A and B works well.

Unfortunately, for simulation C, it stopped in the middle of simulation. It stated there "calculating solution" but it never move or calculate further even after 1 or 2 hours. I re-run the same injection file C using 32-bit windows 7 and it works fantastically.

Can I know what's going wrong? Any problem or error with this? I attached the picture as below for reference.

Thank you.

Attached Images

Image.jpg (47.0 KB, 10 views)

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to increase "Newton Pressure Iteration Limit"	kus	CFX	9	April 21, 2013 01:54
Can I solve this problem by Fluent?	Kai_kc	FLUENT	1	October 27, 2010 05:29
The problem of inner iteration when calling the subroutine	guoxj	CFX	18	October 23, 2010 20:37
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13
Creating, loop or iteration using expression edito	Jan	CFX	3	July 28, 2003 11:01

All times are GMT -4. The time now is 00:59.