problem with activation energy in fluent

Rana.P · April 15, 2014, 04:50

Hi guys,
i want to enter some reactions manually.but i have no idea about the activation energy unit in fluent.it is in ((j/kg mol)).

does any body know how to change it to ((cal/mol)) or reverse?

thanks

reformat · April 17, 2014, 04:58

Hi Rana

The unit of activation energy is in J/kmol.
Easiest way out is to convert your cal/mol to J/kmol using online unit converter for example.

Rana.P · April 21, 2014, 04:55

tnx for ur reply!

shk12345 · April 21, 2014, 10:47

There is option in define>>units.
From where you can change the units in fluent.
Try there if u have the unit if Energy there.

Rana.P · April 23, 2014, 08:52

it was great!
tnx in advance!

flappy · February 25, 2016, 07:16

Hi,

In the Reactions window in the Activation Energy field it says one must insert the value with the unit (j/kgmol). Is this a type-o and j/mol or j/kmol is required?

Best regards,
f.

April 15, 2014, 04:50	problem with activation energy in fluent	#1
Rana.P New Member Ra'na Join Date: Oct 2013 Location: Tehran.Iran Posts: 9 Rep Power: 14	Hi guys, i want to enter some reactions manually.but i have no idea about the activation energy unit in fluent.it is in ((j/kg mol)). does any body know how to change it to ((cal/mol)) or reverse? thanks

April 17, 2014, 04:58		#2
reformat New Member Jackson Sim Join Date: Apr 2014 Posts: 7 Rep Power: 13	Hi Rana The unit of activation energy is in J/kmol. Easiest way out is to convert your cal/mol to J/kmol using online unit converter for example. Mj_khaliliyan likes this.

February 25, 2016, 07:16	Activation Energy type-o?	#6
flappy New Member Join Date: Feb 2016 Posts: 4 Rep Power: 11	Hi, In the Reactions window in the Activation Energy field it says one must insert the value with the unit (j/kgmol). Is this a type-o and j/mol or j/kmol is required? Best regards, f.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MPI problem with fluent	aryanet	FLUENT	17	October 30, 2017 22:04
Problem in using parallel process in fluent 14	Tleja	FLUENT	3	September 13, 2013 11:54
problem on energy and flow equation solving separately	preetam69	FLUENT	2	July 30, 2013 22:08
Can I solve this problem by Fluent?	Kai_kc	FLUENT	1	October 27, 2010 06:29
Problem about Fluent on Linux	hbinma	FLUENT	3	July 6, 2008 11:49

April 21, 2014, 04:55		#3
Rana.P New Member Ra'na Join Date: Oct 2013 Location: Tehran.Iran Posts: 9 Rep Power: 14	tnx for ur reply!

April 21, 2014, 10:47		#4
shk12345 Senior Member shoeb khan Join Date: Nov 2011 Posts: 179 Rep Power: 16	There is option in define>>units. From where you can change the units in fluent. Try there if u have the unit if Energy there.

April 23, 2014, 08:52		#5
Rana.P New Member Ra'na Join Date: Oct 2013 Location: Tehran.Iran Posts: 9 Rep Power: 14	it was great! tnx in advance!