Fluent inviscid solution

ashishtbm · May 28, 2013, 05:01

I am simulating a 2D cylinder under inviscid condition, but I am getting positive values of both lift and drag coefficient, while ideally both should be zero. I even did naca 0012 under inviscid condition but in this, lift coefficient is ok, but drag is still positive and is not reduced to zero. I want to know which model to be used and i what condition to to simulate ideal condition so that pressure drag becomes zero in my simulation?

sbaffini · May 28, 2013, 12:21

An ideal flow would give the results you expect. However, a numerically simulated inviscid flow carries all the numerical viscosity of the numerical method and it is impossible to avoid some numerical drag. For the cylinder case i expect no lift however, and it is possible that the flow field was not symmetric when you computed the lift.

yhy20081016 · June 21, 2014, 12:43

For the cylinder case, since there exists numerical viscosity, it is possible that the unsteady Karman vortex street occurs. If it happens, then the lift will not be zero.

May 28, 2013, 05:01	Fluent inviscid solution	#1
ashishtbm New Member Ashish Kumar Join Date: May 2013 Posts: 4 Rep Power: 12	I am simulating a 2D cylinder under inviscid condition, but I am getting positive values of both lift and drag coefficient, while ideally both should be zero. I even did naca 0012 under inviscid condition but in this, lift coefficient is ok, but drag is still positive and is not reduced to zero. I want to know which model to be used and i what condition to to simulate ideal condition so that pressure drag becomes zero in my simulation?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PLOT3D solution into Fluent	ufocfd	FLUENT	0	November 12, 2012 12:04
Redefining variables in fluent instead using limits (control solution)	akhlaghi	FLUENT	0	February 19, 2011 06:14
intializing data in fluent from an available solution( from an opensource code)	ayannath23	FLUENT	1	December 21, 2010 12:54
Solution calculations and convergence in Fluent	Freeman	FLUENT	7	May 3, 2009 22:26
Generate solution (fluent)	Nic	FLUENT	6	February 27, 2002 11:00

May 28, 2013, 12:21		#2
sbaffini Senior Member Paolo Lampitella Join Date: Mar 2009 Location: Italy Posts: 2,152 Blog Entries: 29 Rep Power: 39	An ideal flow would give the results you expect. However, a numerically simulated inviscid flow carries all the numerical viscosity of the numerical method and it is impossible to avoid some numerical drag. For the cylinder case i expect no lift however, and it is possible that the flow field was not symmetric when you computed the lift.

June 21, 2014, 12:43		#3
yhy20081016 Member yehanyu Join Date: Mar 2012 Location: Beijing, China Posts: 48 Rep Power: 14	For the cylinder case, since there exists numerical viscosity, it is possible that the unsteady Karman vortex street occurs. If it happens, then the lift will not be zero.